China ms sheet rolling machine

From a production perspective, the emergence and development of China ms sheet rolling machine are driven by considerations of economy and adaptability. They have advantages such as high efficiency, small size, light weight, simple structure, easy manufacturing and installation, and disassembly. To prevent barrel deformation of the rolling machine, the following measures can be taken:
1、 Equipment selection and design
When choosing a ms sheet rolling machine, ensure that its roller shaft has sufficient rigidity. The rigidity of the roller shaft is related to its cross-sectional modulus, and is limited by the equipment structure and other factors. It is recommended that the equipment manufacturer design the roller shaft with a slight arc shape based on the length of the rolling machine, the performance of the coil material, the thickness of the plate, and other parameters to enhance its rigidity.

When selecting, you can choose a ms sheet rolling machine with auxiliary support rollers in the middle of the lower roller to enhance the rigidity of the lower roller. The number of auxiliary support rollers should be set according to the length of the equipment, or both roller shaft arc correction and auxiliary support rollers can be used simultaneously.

2、 Rolling process adjustment
For a ms sheet rolling machine that has not undergone roller shaft arc correction and does not have a lower roller auxiliary support roller, when rolling the cylinder at the maximum capacity of the equipment, the cylinder should be segmented and spliced as much as possible to reduce the risk of barrel deformation.
By appropriately reducing the pressure on the upper roller and decreasing the amount of pressure applied each time without affecting the compression and rolling of the board, the bending deformation of each roller shaft can be reduced, and the gap between the upper and lower rollers can be kept basically consistent, thereby reducing the barrel shaped deformation of the cylinder.
During the rolling process, two cushion blocks can be placed between the sheet metal and the upper roller to assist in adjustment, in order to maintain the basic consistency of the compression force and bending force of the sheet metal along the length direction of the roller axis, thereby avoiding barrel deformation.
3、 Daily operation and maintenance
When operating the rolling machine in daily life, attention should be paid to the operating method to avoid incorrect operation that may cause deformation or malfunction of the rolling machine.
Regularly inspect and maintain the ms sheet rolling machine, including the wear of the roller shaft, whether the fasteners are loose, whether the lubrication is good, etc., to ensure the normal operation of the equipment and extend its service life.
In summary, comprehensive measures such as equipment selection and design, rolling process adjustment, and daily operation and maintenance can effectively prevent barrel deformation of the rolling machine.