ss plate rolling machine manufacturer

Before using the ss plate rolling machine, in addition to starting the equipment in the normal way, it is also necessary to inspect the equipment to ensure that everything is normal before starting the equipment. Below, the ss plate rolling machine manufacturer will provide a detailed understanding of the inspection work carried out before starting the equipment.

1. Firstly, after the device is powered on, the lower roller needs to move in both forward and reverse directions, and then the upper roller needs to perform a lifting motion to check for any jamming.

2. And before starting up, lubricating oil should be added to other parts according to the markings on the lubrication table to ensure good lubrication effect during operation, and the lubricating oil used should be of good quality and free of sedimentation.

3. When using a crane to lift steel plates or drums, it is not allowed to collide with the ss plate rolling machine. After the rolling is completed, the unused materials need to be cleaned up as soon as possible, and then the power of the equipment needs to be turned off after use.

4. And when using, it is necessary to regularly check whether there is severe wear on the triangular belt, handle, knob, buttons and other positions of the equipment, because severe wear on these parts can greatly affect the use. Therefore, when severe wear is found, it needs to be replaced in a timely manner.

5. Generally, after use, operators need to add lubricating oil to the machine tool and wipe it clean. The parts that have not been painted should also be avoided from rusting.

The above is the specific operation content of the start-up inspection of the ss plate rolling machine. After the inspection, it is necessary to ensure that all data is relatively normal before starting the equipment for use. Also, it is important to observe whether there are any abnormal situations when using the equipment.