Roller machine for sheet metal manufacturer

From the perspective of electrical engineering machine function, axial movement of the roller machine for sheet metal manufacturer will reduce the interaction between the stator and rotor, resulting in a decrease in the carrying capacity of the roller machine for sheet metal and back and forth movement. This will cause the current of the frequency converter to fluctuate, affecting its lifespan.

Mechanically speaking, back and forth movement can affect the service life of bearings. The higher the speed of operation, the more the rolling machine shaft moves, causing the gap between the fusion parts that should not have been moved relative to each other to increase, resulting in increased motor vibration and noise, and the possibility of "sweeping the chamber", which reduces the service life. Hurry up and check to prevent the rolling plate mechanical and electrical engineering machine from moving, which may cause shaft movement due to quality issues and cannot be prevented. Prevent the motor from being subjected to axial force. The function of the spindle unit of the high-efficiency grinding machine of the mechanical roller machine for sheet metal largely determines the limit of the grinding process of the mechanical roller machine for sheet metal. Therefore, in order to complete the high-efficiency grinding process of the mechanical roller machine for sheet metal, high requirements are often placed on the wheel drive and bearing speed. Mechanical rolling machine bearings can be selected from rolling bearings, magnetic levitation bearings, air static pressure bearings, or liquid dynamic static pressure bearings. The working conditions of the hydraulic motor and hydraulic pump of the roller machine for sheet metal are different, and their functional requirements are also different. Therefore, there are still many distinctions between hydraulic motors and hydraulic pumps of the same type.
The hydraulic system of the hydraulic roller machine for sheet metal consists of a hydraulic pump station, solenoid valves, stacking valves, oil cylinders, and pipelines.
A high-pressure gear pump is driven by an oil pump motor through an internal toothed elastic coupling to deliver pressure oil. To ensure the cleanliness of the oil, an oil filter is installed at the oil pump port. The pressure oil coming out of the oil pump first enters the pressure regulating system to set the pressure, and then passes through a channel block and a three position four-way reversing valve to the oil cylinder. Check whether the brake and clutch of the rolling machine behave stably and harmoniously during the pure operation test, whether the interlocking device is vivid, and whether the conflict plate is intact and intact. Secondly, during the operation of the roller machine for sheet metal, it is necessary to ensure that the workpiece is placed stably and in the correct position before it can be driven and operated. The information should be understood and a designated person should be assigned to provide instructions; Hands must not be placed on the rolled steel plate, and it is not allowed to use a template for inspection. After stopping the machine, a template can be used to check the roundness; When rolling workpieces that cannot be fully rounded, a certain margin should be reserved when rolling to the end of the steel plate to prevent the workpiece from falling and injuring people; During homework, it is strictly prohibited to stand on the workpiece or to find the correct roundness on the already rolled cylinder; When rolling thick and large-diameter cylinders or workpieces with high raw material strength, the rolling mill should be moved in small amounts and rolled multiple times to form; When rolling narrow cylinders, they should be rolled in the middle of the rolling mill; After the workpiece enters the rolling mill, precautions should be taken to prevent hands and clothes from being caught in the rolling mill.